D5 Green is a highly innovative, multifunctional admixture for concretes, mortars, dry building mixtures, grouts and cements. It significantly increases the strength of concrete, allowing a substantial reduction in cement content and carbon footprint.
Increase concrete strength
Reduce cement content
Reduce carbon footprint
Accelerate setting time.
Reduce cement content and carbon footprint
Cement production is estimated to account for 8% of global carbon emissions.
Using D5 Green at 2-3% can reduce cement content and lower the carbon footprint of concrete by 20% (or up to 33% when used with supplementary cementitious materials), without impairing its performance.
Zaramag Hydro Power Station built with D5 Green, Zaramag, North Ossetia 2010-2018
D5 Green increases the strength of concrete by 25%-35% when added at 2-3% of cement mass.
D5 Green has been used in constructions with stringent strength and durability requirements.
High-rise apartment block built with D5 Green, Rostov-on-Don 2009.
Accelerate setting time
D5 Green accelerates the strength setting of concrete. Independent testing shows an increase in day 1 strength by 70% - 140% and significantly earlier achievement of target 28- day strength.
For this reason, D5 Green has been used in projects where developers needed to considerably decrease the
period of construction or remove formworks early.
Caspian glass factory built with D5 Green, Dagestan 2013.
Along with reducing the carbon footprint of concrete, D5 Green is made of natural minerals and a modified plasticiser.
It does not form toxic compounds in the atmosphere or water or contain substances harmful to concrete or steel reinforcement. It is suitable for potable water storage.
Trout farm built with D5 Green, Vladikavkaz 2019.
As a cementitious powder or mixture, D5 may cause skin and eye irritation if not handled with care, may
be harmful if inhaled or swallowed.
As a precautionary measure, please use outdoors or in well-ventilated area, and wear personal protective equipment:
goggles, gloves and a respirator, ensure access to flowing water.
Recommended dosage is 2%-3% of cement content (efficiency increases with dosage).
D5 GREEN should be added into a concrete mixer in dry form together with sand or cement and should be thoroughly mixed for at least 30-60 seconds to ensure even distribution through the mixture. Note, that water content should be reduced by 15-20%, compared to concrete of the same target slump but with no admixtures. Trial mixes are recommended to establish the exact water content.
To achieve the best results with D5 GREEN, the normal good practices for concrete placement and curing should be observed.
Storage And Shelf Life
24 months in dry conditions in original factory packaging
Want to know more?
Fill out the form to get in touch